Value Added Without Extra Cost

In today's world, getting extra value without extra cost is a rarity.  Not so with SenDEC Flash Alert!

In addition to monitoring equipment run hours, Flash Alert is available for Free at no extra charge. Flash Alert helps equipment operators know when to service and what service to perform.  When service is due, the meter flashes the required maintenance task in alternating sequence with the normal meter display.  There's no better way to extend the operating life and improve the performance of equipment.

Up to Two Flash Alerts are available!

Flash Alert 1: If desired, alert 1 can be programmed with a first time break-in interval that is different from all subsequent alarm 1 intervals.  For example, an OEM might want the oil changed after the first 5 hours of run time, and at 25 hour intervals thereafter. Flash Alert 2: If alert 2 is used, all intervals must be the same, but they can differ from those for alert 1.  For example; alert 2 might flash LUBE every 55 hours, while alert 1 flashes CHG OIL every 25 hours.

Flash Alerts are OEM specified and can be either: Automatic: warns the user of service before and after the maintenance interval and shuts off automatically (standard). or Latching: Flash Alerts remain until a Reset wand is held near the meter to reset the Flash Alert and calculate the next maintenance interval. (only available on select models) (Custom display Icons and messages are also available for high quantity OEMs)